Anterwell Technology Ltd.
Large Original stock of IC Electronics Components, Transistors, Diodes etc.
High Quality, Reasonable Price, Fast Delivery.
Product Details:
Payment & Shipping Terms:
|
Ambient Operating Temperature: | –40 To 125 °C | Temperature Under Bias: | –50 To 125 °C |
---|---|---|---|
Storage Temperature: | –65 To 150 °C | Input Or Output Voltage: | –2 To 7 V |
Supply Voltage: | –2 To 7 V | Program Supply Voltage: | –2 To 14 V |
High Light: | programming ic chips,programmable audio chip |
M27C512
512 Kbit (64K x8) UV EPROM and OTP EPROM
FEATURES SUMMARY
■ 5V ± 10% SUPPLY VOLTAGE in READ OPERATION
■ ACCESS TIME: 45ns
■ LOW POWER “CMOS” CONSUMPTION:
– Active Current 30mA
– Standby Current 100µA
■ PROGRAMMING VOLTAGE: 12.75V ± 0.25V
■ PROGRAMMING TIMES of AROUND 6sec.
■ ELECTRONIC SIGNATURE
– Manufacturer Code: 20h
– Device Code: 3Dh
■ PACKAGES
– Lead-Free Versions
SUMMARY DESCRIPTION
The M27C512 is a 512 Kbit EPROM offered in the two ranges UV (ultra violet erase) and OTP (one time programmable). It is ideally suited for applications where fast turn-around and pattern experimentation are important requirements and is organized as 65536 by 8 bits.
The FDIP28W (window ceramic frit-seal package) has transparent lid which allows the user to expose the chip to ultraviolet light to erase the bit pattern. A new pattern can then be written to the device by following the programming procedure. For applications where the content is programmed only one time and erasure is not required, the M27C512 is offered in PDIP28, PLCC32 and TSOP28 (8 x 13.4 mm) packages.
In addition to the standard versions, the packages are also available in Lead-free versions, in compliance with JEDEC Std J-STD-020B, the ST ECOPACK 7191395 Specification, and the RoHS (Restriction of Hazardous Substances) directive.
Absolute Maximum Ratings
Symbol | Parameter | Value | Unit |
TA | Ambient Operating Temperature (3) | –40 to 125 | °C |
TBIAS | Temperature Under Bias | –50 to 125 | °C |
TSTG | Storage Temperature | –65 to 150 | °C |
TLEAD | Lead Temperature during Soldering | (note 1) | °C |
VIO (2) | Input or Output Voltage (except A9) | –2 to 7 | V |
VCC | Supply Voltage | –2 to 7 | V |
VA9 (2) | A9 Voltage | –2 to 13.5 | V |
VPP | Program Supply Voltage | –2 to 14 | V |
Note:
1. Compliant with the JEDEC Std J-STD-020B (for small body, Sn-Pb or Pb assermbly), the ST ECOPACK® 7191395 specification, and the European directive on Restrictions on Hazardous Substances (RoHS) 2002/95/EU.
2. Minimum DC voltage on Input or Output is –0.5V with possible undershoot to –2.0V for a period less than 20ns. Maximum DC voltage on Output is VCC +0.5V with possible overshoot to VCC +2V for a period less than 20ns.
3. Depends on range.
Figure 1. Packages Figure 2. Logic Diagram
Signal Names
A0-A15 |
Address Inputs |
Q0-Q7 |
Data Outputs |
E |
Chip Enable |
GVPP |
Output Enable / Program Supply |
VCC |
Supply Voltage |
VSS |
Ground |
NC |
Not Connected Internally |
DU |
Don’t Use |
Figure 3. DIP Connections Figure 4. LCC Connections
Figure 5. TSOP Connections
High Power Rectifier Diode 1N4756A , Silicon Planar Zener Diodes
Bridge Type Rectifier Diode 1N4007 50 to 1000 Volts 1.0 Ampere
1N4742A Silicon Planar Zener Diodes for Stabilized Power Supply
Power Programmable IC Chips XC6SLX100-3FGG484C Spartan-6 Family Overview
128K Bytes Sound IC Chip Programming ATMEGA128-16AU 8 Bit Microcontroller
EMC Programmable IC Chips Compliant Slew Rate Limited EI , Timer IC Chip
SMD Power Mosfet Module L7812CV TO-220 Power Trans Electronic Compoents
2SD1594 3 Pin Transistor NEC NPN Power Transistor Switching High Speed
2N5459 Power Mosfet Transistor N-Channel To-92 Original Stock FSC